FILTER-MATE® LIQUID SOFTENER CLEANER

Liquid Resin Bed Cleaning Solution

Maintains Performance of Softener Resin

Prevents fouling in softener and improves softener performance.

Water Management Solutions - Chlorine Pellets

Product Information

FILTER-MATE® LIQUID SOFTENER CLEANER is a specially formulated liquid cleaner designed to clean resin pores of iron, manganese, silt, metal particles and organic compounds that cause softener inefficiencies. Regular use of FILTER-MATE® LIQUID SOFTENER CLEANER will restore the softener beads and control valve parts back to peak efficiency and maintain the life of the unit. For best results, use an automatic feeder or manually add during regeneration to prevent mineral build up.

FILTER-MATE® LIQUID SOFTENER CLEANER will chemically clean the fouled resin bed of a water softener and restore the exchange capacity of the resin. Over time, most types of water softener resins can become fouled with iron and other contaminants that decrease the performance and efficiency of the ion exchange system. This fouling can also cause channeling, pressure drop, loss of capacity, water hardness, and iron leakage. Don't let this happen to your softener! Regular use of FILTER-MATE® LIQUID SOFTENER CLEANER will minimize fouling, prevent mineral buildup on parts, and extend the life of your softener's resin.

AVAILABLE SIZES: 32 fl. oz.

Cleaning Tips

(Please follow cautions and instructions on the label carefully.)

FIRST APPLICATION FOR A FOULED UNIT

Use 4 oz. (1/2 cup) of FILTER-MATE® LIQUID SOFTENER CLEANER per cubic foot of softener resin. (Most residential softeners contain approximately 1 cubic foot of resin. If unsure, check your owner's manual). Pour FILTER-MATE® LIQUID SOFTENER CLEANER directly into brine well. If your softener has no brine well, pour FILTER-MATE®LIQUID SOFTENER CLEANER directly into salt tank when salt is low. Manually regenerate the softener. Repeat regeneration if taste, odor, or discoloration is detected in discharge, then run cold soft water tap nearest the softener until water tastes, smells, and appears normal.

REGULAR/MAINTENANCE USE

Add 1-2 oz. of FILTER-MATE® LIQUID SOFTENER CLEANER per cubic foot of resin at each regeneration.

AUTOMATIC FEEDER SYSTEMS

For best results, use with an automatic resin-cleaning feeder system. Fill the feeder with FILTER-MATE® LIQUID SOFTENER CLEANER to the FILL mark indicated on the feeder but do not overfill. Add more FILTER-MATE® LIQUID SOFTENER CLEANER when the solution level drops to or below the REFILL line on the label.